SMTA International Conference Proceedings


Temperature Cycling Performance of a Quad Flat No Lead (QFN) Package Assembled With Multiple Pb-Free Solders

Authors: Richard Coyle, Heather McCormick, Peter Read, Richard Popowich, and Debra Fleming
Company: Alcatel-Lucent and Celestica Inc.
Date Published: 10/16/2011   Conference: SMTA International


Abstract: The thermal fatigue performance of SnAgCu (SAC) Pb-free and SnPb eutectic solders was compared using accelerated temperature cycling (ATC). The Pb-free solder alloys were SAC405, SAC305, and SAC105. The cycling tests were performed with a 7 mm x 7 mm Quad Flat No-Lead (QFN) (BGA) test vehicle with 0/100 ºC temperature cycling using dwell times of both 10 and 60 minutes. The initial results from this study were published in an earlier paper [1]. The current paper addresses some assembly deficiencies in the previous work and presents new temperature cycling data to complete the objectives of the original study. The test results show a direct relationship between characteristic fatigue life and Ag content, with the higher Ag content alloys outperforming those with the lowest Ag content. The characteristic lifetime for the SnPb solder exceeds that of the Pb-free solders but the high Ag alloys also have relatively high characteristic lifetimes. As expected, there is a consistent inverse relationship between fatigue life and dwell time for all solders including the SnPb eutectic.

Key Words: 

Pb-free solder, SnPb solder, QFN, SAC, dwell time



Members download articles for free:

Not a member yet?

What else do you get when you join SMTA? Read about all of the benefits that go along with membership.

Notice: Sharing of articles is restricted to just your immediate work group. Downloaded papers should not be stored on an external network or shared on the internet.


Back


SMTA Headquarters
6600 City West Parkway, Suite 300
Eden Prairie, MN 55344 USA

Phone +1 952.920.7682
Fax +1 952.926.1819